| Author |
Message |
Dannleo21
Guest
|
|
| Back to top |
|
 |
80 Knight
Guest
|
 Posted:
Thu Nov 17, 2005 9:15 am Post subject:
Re: programming remote |
|
|
"Dannleo21" <UseLinkToEmail@www.autoforumz.com> wrote in message
news:701379_798613a2290e21c868bd84209749b8b0@autoforumz.com...
| Quote: | Dear users i bought a used keyless remote for a 1994 bucik park ave
and all the #s macth on the back nad but i need to know how to program
it and i don't want to have to pay 100 to dealer so does anybody have
detaild intr plase help thank you Daniel
|
Below are instructions I found for a 1992 Buick Park Av, give them a try:
Jump the (ALDL) Assembly Line Diagnostic Link. You will find this connector
under the driver side dash, but you will have to look through a square cut
out in the panel to see the connector, it is recessed behind that panel,
almost directly under the steering column. It should look like this;
_________|________
[F] [E] [D] [C] [B] [A]
[G] [H] [J] [K] [L] [M]
Jumper pin A to pin G with a fused jumper (3A)
Doors will lock and unlock
Press the UNLOCK button on the remote
Doors should lock and unlock again
if you have more remotes press their unlock button (up to 4)
remove jumper wire |
|
| Back to top |
|
|
Steve Mackie
Guest
|
| Posted:
Thu Nov 17, 2005 6:01 pm Post subject:
Re: programming remote |
|
|
Close, the '94 has the OBDII connector (maybe), he'll have to jumper pins 4
and 8.
Steve
| Quote: | Below are instructions I found for a 1992 Buick Park Av, give them a try:
Jump the (ALDL) Assembly Line Diagnostic Link. You will find this
connector
under the driver side dash, but you will have to look through a square cut
out in the panel to see the connector, it is recessed behind that panel,
almost directly under the steering column. It should look like this;
_________|________
[F] [E] [D] [C] [B] [A]
[G] [H] [J] [K] [L] [M]
Jumper pin A to pin G with a fused jumper (3A)
Doors will lock and unlock
Press the UNLOCK button on the remote
Doors should lock and unlock again
if you have more remotes press their unlock button (up to 4)
remove jumper wire
|
|
|
| Back to top |
|
|
80 Knight
Guest
|
| Posted:
Fri Nov 18, 2005 1:28 am Post subject:
Re: programming remote |
|
|
Damn. I should have remembered that. Thanks Steve!! :)
"Steve Mackie" <stevemackie@ns.sympatico.ca> wrote in message
news:qi_ef.125404$Ph4.3843916@ursa-nb00s0.nbnet.nb.ca...
| Quote: | Close, the '94 has the OBDII connector (maybe), he'll have to jumper pins
4
and 8.
Steve
Below are instructions I found for a 1992 Buick Park Av, give them a try:
Jump the (ALDL) Assembly Line Diagnostic Link. You will find this
connector
under the driver side dash, but you will have to look through a square
cut
out in the panel to see the connector, it is recessed behind that panel,
almost directly under the steering column. It should look like this;
_________|________
[F] [E] [D] [C] [B] [A]
[G] [H] [J] [K] [L] [M]
Jumper pin A to pin G with a fused jumper (3A)
Doors will lock and unlock
Press the UNLOCK button on the remote
Doors should lock and unlock again
if you have more remotes press their unlock button (up to 4)
remove jumper wire
|
|
|
| Back to top |
|
|
|
|
|
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in