| Author |
Message |
Me
Guest
|
 Posted:
Fri Nov 11, 2005 9:14 am Post subject:
Reseting power window "auto-up" function |
|
|
Is there a way to reset the auto-up power window function on a 2002
Pathfinder LE? The anti-pinch, or jam protection, or anti-trap feature is
lowering the window about 1/4 of the way down after each use of the auto-up
feature. The window rolls up and stays just fine if not using the auto-up
feature. If anyone has access to a service manual to see if there is a
reset function I would appreciate it. Thanks in advance.
Dustin
|
|
| Back to top |
|
 |
E Meyer
Guest
|
| Posted:
Fri Nov 11, 2005 7:04 pm Post subject:
Re: Reseting power window "auto-up" function |
|
|
On 11/10/05 11:23 PM, in article vVVcf.2792$th3.2039@tornado.texas.rr.com,
"Me" <me@nowhere.com> wrote:
| Quote: | Is there a way to reset the auto-up power window function on a 2002
Pathfinder LE? The anti-pinch, or jam protection, or anti-trap feature is
lowering the window about 1/4 of the way down after each use of the auto-up
feature. The window rolls up and stays just fine if not using the auto-up
feature. If anyone has access to a service manual to see if there is a
reset function I would appreciate it. Thanks in advance.
Dustin
|
First make sure the window is not binding in the track or some obstruction
is stopping it.
To access the limit switch, you will need to take off the door trim. The
reset switch on the window motor itself.
Here is the reset procedure from the service manual:
RESET PROCEDURES
NABT0029S02
After installing parts, proceed as follows:
1. Close the door window completely.
2. Press the reset switch and open the door window completely.
3. Release the reset switch. After making sure the reset switch
has returned to the original position, close the door window
completely.
4. The limit switch is now reset.
CAUTION:
Be sure to manually open or close the door window. (Do not
use the automatic open-close procedures.) |
|
| Back to top |
|
|
Me
Guest
|
| Posted:
Sat Nov 12, 2005 7:21 am Post subject:
Re: Reseting power window "auto-up" function |
|
|
"E Meyer" <epmeyer50@msn.com> wrote in message
news:BF99F30B.E583F%epmeyer50@msn.com...
| Quote: | On 11/10/05 11:23 PM, in article vVVcf.2792$th3.2039@tornado.texas.rr.com,
"Me" <me@nowhere.com> wrote:
Is there a way to reset the auto-up power window function on a 2002
Pathfinder LE? The anti-pinch, or jam protection, or anti-trap feature
is
lowering the window about 1/4 of the way down after each use of the
auto-up
feature. The window rolls up and stays just fine if not using the
auto-up
feature. If anyone has access to a service manual to see if there is a
reset function I would appreciate it. Thanks in advance.
Dustin
First make sure the window is not binding in the track or some obstruction
is stopping it.
To access the limit switch, you will need to take off the door trim. The
reset switch on the window motor itself.
Here is the reset procedure from the service manual:
RESET PROCEDURES
NABT0029S02
After installing parts, proceed as follows:
1. Close the door window completely.
2. Press the reset switch and open the door window completely.
3. Release the reset switch. After making sure the reset switch
has returned to the original position, close the door window
completely.
4. The limit switch is now reset.
CAUTION:
Be sure to manually open or close the door window. (Do not
use the automatic open-close procedures.)
|
Thank you for the quick reply. I'll try it this weekend.
Dustin
|
|
| Back to top |
|
|
|
|
|
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in