| Author |
Message |
Greg
Guest
|
 Posted:
Thu Nov 11, 2004 8:25 pm Post subject:
How to tell C6 from C5? |
|
|
How do you tell what tranny you have, where are the markings on it, it's
an 87 F150, 351 engine, over the years I've replace different thing on this
truck and every time I say year and make I get the wrong part, shops have
problems too, rebuilt carb was not right according to shop, alternator, not
right according to shop, belts not right. So I can't just go by the fact
that an 87 - 3 speed should be a C6.
I know the manual tranny I pulled out of my jeep said Ford on top, it was
an SR4, ( garbage ) so if the markings are on the top like that it will be
pretty hard to tell without getting it out.
|
|
| Back to top |
|
 |
BillyBBad
Guest
|
| Posted:
Thu Nov 11, 2004 9:26 pm Post subject:
Re: How to tell C6 from C5? |
|
|
On Thu, 11 Nov 2004 15:25:39 GMT, "Greg" <greglc84@hotmail.com> wrote:
| Quote: | How do you tell what tranny you have, where are the markings on it, it's
an 87 F150, 351 engine, over the years I've replace different thing on this
truck and every time I say year and make I get the wrong part, shops have
problems too, rebuilt carb was not right according to shop, alternator, not
right according to shop, belts not right. So I can't just go by the fact
that an 87 - 3 speed should be a C6.
I know the manual tranny I pulled out of my jeep said Ford on top, it was
an SR4, ( garbage ) so if the markings are on the top like that it will be
pretty hard to tell without getting it out.
Hope this helps: |
http://www.ford-trucks.com/article/idx/0/056/article/Ford_Transmission_Spotters_Guide.html |
|
| Back to top |
|
|
Greg
Guest
|
| Posted:
Fri Nov 12, 2004 12:26 am Post subject:
Re: How to tell C6 from C5? |
|
|
Thanks, helps a lot.
"BillyBBad" <nospam5934@hellsouth.org> wrote in message
news:41939246.48655356@newsgroups.bellsouth.net...
| Quote: | On Thu, 11 Nov 2004 15:25:39 GMT, "Greg" <greglc84@hotmail.com> wrote:
How do you tell what tranny you have, where are the markings on it, it's
an 87 F150, 351 engine, over the years I've replace different thing on
this
truck and every time I say year and make I get the wrong part, shops have
problems too, rebuilt carb was not right according to shop, alternator,
not
right according to shop, belts not right. So I can't just go by the fact
that an 87 - 3 speed should be a C6.
I know the manual tranny I pulled out of my jeep said Ford on top, it
was
an SR4, ( garbage ) so if the markings are on the top like that it will be
pretty hard to tell without getting it out.
Hope this helps:
http://www.ford-trucks.com/article/idx/0/056/article/Ford_Transmission_Spotters_Guide.html
|
|
|
| Back to top |
|
|
|
|
|
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in