| Author |
Message |
Mar1
Guest
|
 Posted:
Wed Nov 24, 2004 5:41 am Post subject:
Cold Start Bubling |
|
|
Hi,
My 1991 Cressida with 7MGE is bubling (low RPM idle) for around 10 to
15 sec. when cold start then it'll be smooth. could be the choke?
|
|
| Back to top |
|
 |
Philip
Guest
|
| Posted:
Wed Nov 24, 2004 5:40 pm Post subject:
Re: Cold Start Bubling |
|
|
Tacoma Dude wrote:
| Quote: | TeGGer® wrote:
Tacoma Dude <redstate@BushVictory.com> sprach im
news:XC0pd.625$Mu3.48695@twister.southeast.rr.com:
Mar1 wrote:
Hi,
My 1991 Cressida with 7MGE is bubling (low RPM idle) for around
10 to 15 sec. when cold start then it'll be smooth. could be the
choke?
7mGE are fuel injected, there's no choke.
And what's "bubling"? I could find no such word in the dctionary.
Should it be "bubbling"? "Burbling"?
Is he trying to describe rough, shaky idle?
Cold-start injector dirty?
First thing I'd do is check for codes and go from there. Sometimes
you get lucky. Otherwise go by the service manual.
|
FIRST thing to do is ignore what you think you hear or felt. Go into denial
about the matter. ;-) |
|
| Back to top |
|
|
Philip
Guest
|
| Posted:
Wed Nov 24, 2004 5:40 pm Post subject:
Re: Cold Start Bubling |
|
|
TeGGer® wrote:
| Quote: | Tacoma Dude <redstate@BushVictory.com> sprach im
news:XC0pd.625$Mu3.48695@twister.southeast.rr.com:
Mar1 wrote:
Hi,
My 1991 Cressida with 7MGE is bubling (low RPM idle) for around
10 to 15 sec. when cold start then it'll be smooth. could be the
choke?
7mGE are fuel injected, there's no choke.
And what's "bubling"? I could find no such word in the dctionary.
Should it be "bubbling"? "Burbling"?
Is he trying to describe rough, shaky idle?
Cold-start injector dirty?
|
Cold Start Injector operation is typically limited to the brief time when
the ignition key is in the START position and the coolant temperature is
below 100°F only.
--
- Philip
|
|
| Back to top |
|
|
Tacoma Dude
Guest
|
| Posted:
Wed Nov 24, 2004 5:40 pm Post subject:
Re: Cold Start Bubling |
|
|
Mar1 wrote:
| Quote: | Hi,
My 1991 Cressida with 7MGE is bubling (low RPM idle) for around 10 to
15 sec. when cold start then it'll be smooth. could be the choke?
|
7mGE are fuel injected, there's no choke. |
|
| Back to top |
|
|
TeGGer®
Guest
|
| Posted:
Wed Nov 24, 2004 5:40 pm Post subject:
Re: Cold Start Bubling |
|
|
Tacoma Dude <redstate@BushVictory.com> sprach im
news:XC0pd.625$Mu3.48695@twister.southeast.rr.com:
| Quote: | Mar1 wrote:
Hi,
My 1991 Cressida with 7MGE is bubling (low RPM idle) for around 10 to
15 sec. when cold start then it'll be smooth. could be the choke?
7mGE are fuel injected, there's no choke.
|
And what's "bubling"? I could find no such word in the dctionary.
Should it be "bubbling"? "Burbling"?
Is he trying to describe rough, shaky idle?
Cold-start injector dirty?
--
TeGGeR®
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/ |
|
| Back to top |
|
|
Tacoma Dude
Guest
|
| Posted:
Wed Nov 24, 2004 5:40 pm Post subject:
Re: Cold Start Bubling |
|
|
TeGGer® wrote:
| Quote: | Tacoma Dude <redstate@BushVictory.com> sprach im
news:XC0pd.625$Mu3.48695@twister.southeast.rr.com:
Mar1 wrote:
Hi,
My 1991 Cressida with 7MGE is bubling (low RPM idle) for around 10 to
15 sec. when cold start then it'll be smooth. could be the choke?
7mGE are fuel injected, there's no choke.
And what's "bubling"? I could find no such word in the dctionary.
Should it be "bubbling"? "Burbling"?
Is he trying to describe rough, shaky idle?
Cold-start injector dirty?
|
Thinking the cold start injector might be leaking and it takes 10-15
seconds to burn off that extra fuel. I dont think the extra fuel would
make it to cylinders when the engine is just sitting there not turning,
it would have to be sucked in at start up. It might be worth while to
pull a spark plug and peek inside the cylinder to see if it's wet at
cold start time. Only other option is to pull the CSI and have it
tested. Everytime I spray carb cleaner down my 85 truck, it'll cough and
sputter until the cleaner is all burnt up. Since the Cressida runs ok
after 10-15 minutes the CSI activation circuit seems to be ok. |
|
| Back to top |
|
|
Tacoma Dude
Guest
|
| Posted:
Wed Nov 24, 2004 5:40 pm Post subject:
Re: Cold Start Bubling |
|
|
TeGGer® wrote:
| Quote: | Tacoma Dude <redstate@BushVictory.com> sprach im
news:XC0pd.625$Mu3.48695@twister.southeast.rr.com:
Mar1 wrote:
Hi,
My 1991 Cressida with 7MGE is bubling (low RPM idle) for around 10 to
15 sec. when cold start then it'll be smooth. could be the choke?
7mGE are fuel injected, there's no choke.
And what's "bubling"? I could find no such word in the dctionary.
Should it be "bubbling"? "Burbling"?
Is he trying to describe rough, shaky idle?
Cold-start injector dirty?
First thing I'd do is check for codes and go from there. Sometimes you |
get lucky. Otherwise go by the service manual. |
|
| Back to top |
|
|
TeGGer®
Guest
|
| Posted:
Thu Nov 25, 2004 4:45 am Post subject:
Re: Cold Start Bubling |
|
|
"Philip" <1chip-state1@earthlink.net> sprach im
news:Gr3pd.10619$pK6.9372@newsread2.news.atl.earthlink.net:
| Quote: | Tacoma Dude wrote:
TeGGer® wrote:
Tacoma Dude <redstate@BushVictory.com> sprach im
news:XC0pd.625$Mu3.48695@twister.southeast.rr.com:
Mar1 wrote:
Hi,
My 1991 Cressida with 7MGE is bubling (low RPM idle) for around
10 to 15 sec. when cold start then it'll be smooth. could be the
choke?
7mGE are fuel injected, there's no choke.
And what's "bubling"? I could find no such word in the dctionary.
Should it be "bubbling"? "Burbling"?
Is he trying to describe rough, shaky idle?
Cold-start injector dirty?
First thing I'd do is check for codes and go from there. Sometimes
you get lucky. Otherwise go by the service manual.
FIRST thing to do is ignore what you think you hear or felt. Go into
denial about the matter. ;-)
|
Or just...buble. :^)
--
TeGGeR®
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/ |
|
| Back to top |
|
|
TeGGer®
Guest
|
| Posted:
Thu Nov 25, 2004 4:47 am Post subject:
Re: Cold Start Bubling |
|
|
"Philip" <1chip-state1@earthlink.net> sprach im
news:Fr3pd.10618$pK6.9155@newsread2.news.atl.earthlink.net:
| Quote: | TeGGer® wrote:
Cold-start injector dirty?
Cold Start Injector operation is typically limited to the brief time
when the ignition key is in the START position and the coolant
temperature is below 100°F only.
|
Oh, you're such a smarty-pants. Tell me what "bubling" means then. >:^P
--
TeGGeR®
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/ |
|
| Back to top |
|
|
Philip
Guest
|
| Posted:
Thu Nov 25, 2004 5:40 am Post subject:
Re: Cold Start Bubling |
|
|
"TeGGer®" <teggeratistopdotcom@changetheobvious.invalid> wrote in message
news:Xns95ABBF4AF7C35teggeratistop@207.14.113.17...
| Quote: | "Philip" <1chip-state1@earthlink.net> sprach im
news:Fr3pd.10618$pK6.9155@newsread2.news.atl.earthlink.net:
TeGGer® wrote:
Cold-start injector dirty?
Cold Start Injector operation is typically limited to the brief time
when the ignition key is in the START position and the coolant
temperature is below 100°F only.
Oh, you're such a smarty-pants. Tell me what "bubling" means then. >:^P
--
TeGGeR®
|
Bubling: The spawn of a "Bubba"
The word might be missing an "r" ... making it "burbling"
--
- Philip |
|
| Back to top |
|
|
toyotawiz
Guest
|
| Posted:
Fri Dec 10, 2004 5:42 am Post subject:
Re: Cold Start Bubling |
|
|
| sounds like its low on coolant |
|
| Back to top |
|
|
|
|
|
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in