| Author |
Message |
Guest
|
 Posted:
Mon Dec 05, 2005 4:53 am Post subject:
Distributor help nededed |
|
|
I tore my distributor apart to change the pickup coil.
On the base there is the gear, and an inch or so there is a ring that
gets a roll pin (looks like a donut with a ridge on it.)
Putting it back together, I am not sure if that ridge does to the
bottom of the distribitor housing, or the narrow end goes up. Does
anyone have a dist. handy to look at? This is for a 1979 400 engine.
Goes in a F150 pickup truck. (In other words, that round device is
wider on one side than the other. Does the wide side, or the narrow
side face toward the bottom of the main distributor housing?)
Thanks
Mark
|
|
| Back to top |
|
 |
Rick
Guest
|
| Posted:
Mon Dec 05, 2005 5:47 am Post subject:
Re: Distributor help nededed |
|
|
<maradcliff@UNLISTED.com> wrote in message
news:pqr6p15t1voc74hvn3heci7mu2ngaifj7c@4ax.com...
| Quote: | I tore my distributor apart to change the pickup coil.
On the base there is the gear, and an inch or so there is a ring
that
gets a roll pin (looks like a donut with a ridge on it.)
Putting it back together, I am not sure if that ridge does to the
bottom of the distribitor housing, or the narrow end goes up. Does
anyone have a dist. handy to look at? This is for a 1979 400
engine.
Goes in a F150 pickup truck. (In other words, that round device is
wider on one side than the other. Does the wide side, or the narrow
side face toward the bottom of the main distributor housing?)
Thanks
Mark
|
The narrow portion is closest to the drive gear, the flanged end is
closest to the housing....
.. |
|
| Back to top |
|
|
Rick
Guest
|
| Posted:
Mon Dec 05, 2005 5:59 am Post subject:
Re: Distributor help nededed |
|
|
"Rick" <notta@goodone.com> wrote in message
news:_dLkf.13735$aA2.1351@newsread2.news.atl.earthlink.net...
| Quote: |
maradcliff@UNLISTED.com> wrote in message
news:pqr6p15t1voc74hvn3heci7mu2ngaifj7c@4ax.com...
I tore my distributor apart to change the pickup coil.
On the base there is the gear, and an inch or so there is a ring
that
gets a roll pin (looks like a donut with a ridge on it.)
Putting it back together, I am not sure if that ridge does to the
bottom of the distribitor housing, or the narrow end goes up.
Does
anyone have a dist. handy to look at? This is for a 1979 400
engine.
Goes in a F150 pickup truck. (In other words, that round device
is
wider on one side than the other. Does the wide side, or the
narrow
side face toward the bottom of the main distributor housing?)
Thanks
Mark
The narrow portion is closest to the drive gear, the flanged end is
closest to the housing....
|
Like this.....
http://home.tir.com/~artemus/Impeller/DSCN2355.JPG
|
|
| Back to top |
|
|
Guest
|
| Posted:
Mon Dec 05, 2005 8:51 am Post subject:
Re: Distributor help nededed |
|
|
On Sun, 04 Dec 2005 23:59:35 GMT, "Rick" <notta@goodone.com> wrote:
| Quote: |
"Rick" <notta@goodone.com> wrote in message
news:_dLkf.13735$aA2.1351@newsread2.news.atl.earthlink.net...
maradcliff@UNLISTED.com> wrote in message
news:pqr6p15t1voc74hvn3heci7mu2ngaifj7c@4ax.com...
I tore my distributor apart to change the pickup coil.
On the base there is the gear, and an inch or so there is a ring
that
gets a roll pin (looks like a donut with a ridge on it.)
Putting it back together, I am not sure if that ridge does to the
bottom of the distribitor housing, or the narrow end goes up.
Does
anyone have a dist. handy to look at? This is for a 1979 400
engine.
Goes in a F150 pickup truck. (In other words, that round device
is
wider on one side than the other. Does the wide side, or the
narrow
side face toward the bottom of the main distributor housing?)
Thanks
Mark
The narrow portion is closest to the drive gear, the flanged end is
closest to the housing....
Like this.....
http://home.tir.com/~artemus/Impeller/DSCN2355.JPG
|
Thanks to both of you. Now I can finish puting it back together.
I thought it went like this, but just was not sure. I should take a
picture myself before I rip things apart.
Mark |
|
| Back to top |
|
|
|
|
|
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in