| Author |
Message |
andy
Guest
|
 Posted:
Fri Nov 18, 2005 7:16 am Post subject:
turn signal relay on 91 200 |
|
|
Has anyone had experience where their turn signals quit working completely
w/ a 91 200? The fuse is good, the switch on the column is relatively new.
Both the turn signals and 4 way flashers are not working. My bentley manual
says the flasher relay is located behind the guage cluster of the dash!? Any
BTDT would be appreciated as I don't want to pull the dash.
TIA.
Andy
|
|
| Back to top |
|
 |
Stephen Clark
Guest
|
| Posted:
Sat Nov 19, 2005 12:18 am Post subject:
Re: turn signal relay on 91 200 |
|
|
That is correct, it is behind the instrument cluster. You can partially
remove the cluster itself enough to reach behind and change the flasher
relay. No need to pull the dash.
--
Stephen Clark
89 Audi 100
Houston, Texas USA
See my Audi in the Registry at www.audiworld.com!
"andy" <trifox13atcovaddotnet> wrote in message
news:266c0$437d2b83$4503c877$18714@msgid.meganewsservers.com...
| Quote: | Has anyone had experience where their turn signals quit working completely
w/ a 91 200? The fuse is good, the switch on the column is relatively new.
Both the turn signals and 4 way flashers are not working. My bentley
manual says the flasher relay is located behind the guage cluster of the
dash!? Any BTDT would be appreciated as I don't want to pull the dash.
TIA.
Andy
|
|
|
| Back to top |
|
|
Tony
Guest
|
| Posted:
Sat Nov 19, 2005 1:11 am Post subject:
Re: turn signal relay on 91 200 |
|
|
It sounds like you are chasing the correct source of the problem.
Removing the instrument cluster (IC) is quite easy on the '91 200.
Just under the lower edge of the IC is a trim strip in which you will find
several screws (allen drive). Remove these and the IC will pull out and slide
toward the center of the car. You will not need to remove the steering wheel or
mess with the air bag.
Once the IC is out everything is very accessible.
TonyJ
current 98 A4 1.8TQM APR
previous: four T44s through '91 100
andy wrote:
| Quote: | Has anyone had experience where their turn signals quit working completely
w/ a 91 200? The fuse is good, the switch on the column is relatively new.
Both the turn signals and 4 way flashers are not working. My bentley manual
says the flasher relay is located behind the guage cluster of the dash!? Any
BTDT would be appreciated as I don't want to pull the dash.
TIA.
Andy
|
|
|
| Back to top |
|
|
Tony
Guest
|
| Posted:
Sat Nov 19, 2005 10:27 pm Post subject:
Re: turn signal relay on 91 200 |
|
|
I have not done that on a T44 so not sure. you should check history at AudiWorld
V8 / T44 forum:
http://forums.audiworld.com/v8/
I remember threads about this.
Stephen Clark wrote:
| Quote: | That is correct, it is behind the instrument cluster. You can partially
remove the cluster itself enough to reach behind and change the flasher
relay. No need to pull the dash.
|
|
|
| Back to top |
|
|
|
|
|
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in